The Mimosa A5c is an access point designed specifically for long-range point-to-multipoint (PtMP) wireless connections, featuring high capacity and a modular structure. By offering fiber-like speeds at a lower cost, it is an ideal solution for applications such as rural broadband access, public safety, and tower-mounted networks.
Maximum Data Rate: 1.0 Gbps IP (1.7 Gbps PHY)
Frequency Range: 4.9 – 6.4 GHz (may vary by country)
Channel Width: 20/40/80 MHz (adjustable in 5 MHz increments)
Modulation and MIMO: 4x4:4 MIMO OFDM, 256-QAM
Output Power: 30 dBm
Receiver Sensitivity (MCS 0):
-87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Gecikme: <8 ms
Maximum Customer Capacity:
100 clients (Wi-Fi Interop mode)
44 clients (SRS mode)
Boyutlar: 300 x 151 x 85 mm
Ağırlık: 1.75 kg
Connector Type: 4 x N type female
Cash Register Material: UV resistant outdoor polymer
Protection Class: IP67 (dust and water resistant)
Operating Temperature: -40°C to +55°C
Moisture Resistance: 5% – 100% (condensing)
Shock and Vibration Resistance: ETS 300-019-2-4 class 4M5
Power Consumption: Maximum 25 W
Power Supply: Passive PoE (48–56 VDC)
Management Interface: HTML5-based web interface, HTTPS
Remote Management: Mimosa Cloud, SNMPv2, Syslog
GPS Synchronization: Network-wide synchronization with GPS + GLONASS support.
Spectrum Management: Channel optimization with active scanning
QoS and VLAN Support: 4 predefined QoS levels, VLAN tagging (Q-in-Q, triple tagging)
Güvenlik: WPA2, 802.1x RADIUS, management VLAN support
Mimosa A5c is sold without an antenna and power adapter. Therefore, you also need to obtain the following accessories:
Power Adapter: Passive PoE supported 48–56 VDC power supply (for example, Mimosa PoE 56V NA adapter)
Anten: Four N-type female connector, dual polarization antennas (for example, Mimosa N5-X series)
EN − TL
Türkçe
